Panasonic projection lenses

Panasonic (panasonic) PT-RZ790 projector replacement lens

Panasonic (panasonic) PT-RZ790 projector replacement lens
Throw ratio: 0.5:1
Throw ratio: 0.6:1
Throw ratio: 0.65-0.76:1
Throw ratio: 0.7:1
Throw ratio: 0.8:1
Throw ratio: 0.9:1
Throw ratio: 2.9-5.5:1
Support projection models: PT-RCQ10 PT-RCQ80 P
Description
Support projection models: PT-RCQ10 PT-RCQ80 PT-RZ120 PT-RZ990 PT-RZ890 PT-RZ790 PT-RZ690
 
Model PT-RCQ10 PT-RCQ80 PT-RZ120 PT-RZ990 PT-RZ890 PT-RZ790 PT-RZ690
Power specification 100-240V AC, 50/60Hz
Power consumption 820 W (8.6 A-3.5 A)
When [Standby Mode] is set to [Energy Saving]: Approximately 0.5 W, when [Standby Mode] is set to [Normal]: Approximately 7 W, When the [Quick Power On] function is enabled: Approximately 110 W
DLP™ chip control panel size 17.0 mm (0.67 inch) diagonal (16:10 aspect ratio)
Display mode DLPTM chip x 1, DLPTM projection system
Display pixels 2,304,000 (1,920 x 1,200 pixels)
Light source Laser diode
Brightness 10,000 lumens (center brightness)*1/9,400 lumens*2
When [Image Mode] is set to [Standard] and [Operation Mode] in [Operation Settings] is set to [Normal]
Luminance output halving time*3 20,000 hours (normal mode/low noise mode 1/low noise mode 2) / 24,000 hours (energy saving mode) /
43,800 hours (long life 1 mode) / 61,320 hours (long life 2 mode) / 87,600 hours (long life 3 mode)
Resolution 1,920 x 1,200 pixels
Contrast *2 10,000:1 (when [Image Mode] is set to [Standard], [Operation Mode] in [Operation Settings] is set to [Normal], and [Dynamic Contrast] is set to [3])
Screen size (diagonal) 1.27-15.24 m (50-600 inches), 16:10 aspect ratio
When using ET-DLE055C, 1.27–5.08 m (50–200 inches), when using ET-DLE035C, 2.54–8.89 m (100–350 inches), when using ET-DLE020C, 2.54–10.16 m (100–400 inches)
Uniformity*2 90%
Lens power zoom (throw ratio 1.7-2.4:1),
Motorized focus F 1.7--1.9, f 25.6--35.7 mm
Optical axis movement*4 (The optical axis is at the center of the screen) Vertical +50 %, -16% (when ET-DLE060C is cted +40 %, -16%) (electric)
Level +30%, -10% (+10%, -20% when using ET-DLE020C; +19%, -10% when using ET-DLE060C; +28%, -10 when using ET-DLE105C/ET-DLE085C %) (Electric)
Keystone correction range Vertical: ±40 ° (±5 ° when ET-DLE020C is cted, ±16 ° when ET-DLE060C is cted, ±22 ° when ET-DLE105C/ET-DLE085C/ET-DLE055C is ted, and ET-DLE035C+ 5 ° ),
Horizontal: ±15 ° (±10 ° when ET-DLE060C iscted) (This function cannot be used when ET-DLE035C/ET-DLE020C iscted)
Optional upgrade kit ET-UK20C
The following keystone correction range: Vertical: ±45 ° (±16 ° when using ET-DLE060C, ±40 ° when using ET-DLE150C/ET-DLE250C, ±22 ° when using ET-DLE105C/ET-DLE085C/ET-DLE055C) ,
Horizontal: ±40 ° (±10 ° when using ET-DLE060C, ±15 ° when using ET-DLE105C/ET-DLE085C/ET-DLE055C) When horizontal and vertical corrections are performed simultaneously, the total value cannot exceed 55 °
Installation method: hoisting/flat, front projection/rear projection
Terminal port SDI input BNC x 1: 3G/HD/SD-SDI input
HDMI input HDMI 19-pin x 1 (supports HDCP 2.2, saturated color, 4K signal input*5)
DVI-D input DVI-D 24-pin x 1 (compatible with DVI 1.0, support HDCP, only compatible with single link)
RGB 1 input RGB x 1 (BNC x 5): RGB/YPBPR/YCBCR/YC/Video
RGB 2 input D-sub HD 15-pin (female) x 1: RGB/YPBPR/YCBCR
Serial/Synchronous input for multiple projectors D-sub 9-pin (female) x 1 for external control (compatible with RS-232C)
Serial / simultaneous output of multiple projectors D-sub 9-pin (male) x 1 for link control
Remote control 1 input M3 × 1 for wired remote control
Remote control 1 output M3 x 1 for link control (wired remote control)
Remote control 2 input D-sub 9-pin (female) x 1 for external control (parallel)
DIGITAL LINK RJ-45 x 1 for network and DIGITAL LINK connection (HDBaseT™ compatible), suitable for PJLink™ (Class 2), 100Base-TX, Art-Net support, HDCP 2.2, saturated color, 4K signal input*5
LAN RJ-45 x 1 for network connection, suitable for PJLink™ (Class 2), 10Base-T/100Base-TX, support Art-Net
Noise level*2 40 dB (normal mode) / 36 dB (low noise mode 1) / 35 dB (low noise mode 2)
Dimensions (width × height × length) with standard lens: 498 x 200*6 x 581 mm
Weight*7 With standard lens: about 23.0 kg
Operating environment Operating temperature: 0-45 °C*8, operating humidity: 10-80% (no condensation)
Application software Logo transfer software, video display device monitoring software, early warning software, professional geometric figure correction software (ET-UK20C upgrade kit, ET-CUK10C/CUK10PC automatic screen adjustment software), iOS/Android™ Smart Projector Control app
Note: PT-FRZ99CL / FRZ89CL / FRZ79CL / FRZ69CL are not equipped with standard lenses. All specifications are the same as PT-FRZ99C / FRZ89C / FRZ79C / FRZ69C.
*1 The average brightness output value of all factory products measured at the center of the screen in normal mode.
*2 The measurement method and labeling method are based on the ISO/IEC 21118: 2020 international standard. This value is the average of all manufactured products.
*3 At this time, the brightness output is reduced to approximately 50%. Comply with IEC62087: 2008 Broadcast Contents standard, normal mode, dynamic contrast mode: 3, under the conditions of a temperature of 30°C, an altitude of 700 meters and a particle concentration of 0.15mg/m³. The use environment and conditions will affect the brightness output halved time. The replacement cycle of parts other than the light source may be shorter than that of the light source. After approximately 20,000 hours of use, it is recommended to contact the dealer for cleaning and inspection of the equipment.
*4 When ET-DLE055C is cted, the optical axis movement function is not supported, and the optical axis is fixed when ET-DLE035C is cted.
*5 The 4K input signal is converted to 1,920 x 1,200 pixel display during projection. Support input through DIGITAL LINK/HDMI® port.
*6 When the feet are shortest.
*7 Average value. Individuals will vary.
*8 Depending on the temperature or altitude of the operating environment, the luminous flux will be reduced to protect the projector.


 

 

Panasonic DLP laser projector short-focus lens evaluation 0.6:1 instead of ET-DLE060 Video link::https://www.bilibili.com/video/BV1nv411r79E



Panasonic DLP laser projection 0.7:1 short-focus lens evaluation replaces ET-DLE055 video link:https://www.bilibili.com/video/BV1Gp4y1k7Xv


Panasonic DLP laser projector installation 2.9-5.5:1 telephoto lens evaluation video link:https://www.bilibili.com/video/BV1UA411Y76e




1.投射比:镜头到画面距离除以画面宽度

   Projection ratio: distance from lens to picture divided by picture width

2.9点亮度均匀度:9点平均亮度除以其中的最高亮度

   9 brightness uniformity: 9 points average brightness divided by the highest brightness

3.与标镜9点均匀亮度光衰比例:镜头9点平均亮度除以标镜9点平均亮度

   Light attenuation ratio of uniform brightness at 9 points of the standard mirror: average brightness at 9 points of the lens divided by average brightness at 9 points of the standard mirro


CAUTION(注意)
LE DU Lens Unit User’s Manual
(镜头部件 用户手册)
Do not give a shock or excessive load to the projector or the lens components as the projector and lens components contain precision parts.
(因为投影机和镜头部件包含精密零件,所以不要对投影机或镜头部件进行剧烈震动或超负载)
When shipping the projector with the lens,remove the lens before shipping the projector. The lens and the lens shift mechanism may encounter damage caused byimproper handling during transportation.
(运输带有镜头的投影机时,运输之前需移除镜头。搬运期间处理不当可能会损坏镜头和镜头位移机制。)
Before removing or installing the lens, be sure to turn off the projecttor, wait until the cooling fans stop, andunplug the power cord.
(移除或安装镜头之前,务必关闭投影机,等待直到冷却风扇停止运转,并拔出电源线。)
Do not touch the lens surface when removing or installing the lens.
(请不要在移除或安装镜头时触及镜头表面。)
Keep fingerpeints, dust or oil off the lens surface. Do not scratching.
(防止指纹、灰尘或油附着到镜头表面。请不要刮伤镜头表面)
Work on a level surface with a soft cloth under it toavoid scratching.
(请在水平面上作业,并在镜头底下铺一块软布以免刮伤。)
When using the lens unit, set the lens shift adjustment to the center of the screen.
(当使用镜头部件时,将镜头位移设定至屏幕中央。)
Adjustment to the lens shift adjustment to the position other than the above can cause the edges of the image to become dark or can cause some shadows.
(将镜头位移调节到上述位置以外的其它位置,可能会使影像边缘变得暗淡或者造成黑影。)

Review

1/3
X
Welcome to LEDU lens
Welcome to the world's largest alternative lenses supplier. We focus on professional projector lenses with a throw ratio of 0.3-9:1. Welcome to leave your contact method and we will contact you as soon as possible.